Emission System - Oxygen Sensors Testing & Replacing - 1 of 3

Posted by admin on September 14th, 2009 and filed under emissions testing |

More info: http://www.metacog.com

Duration : 0:5:54


[youtube XQ9vtD_ssjg]

6 Responses

  1. qualitatserzeugnis Says:

    hi guys, finally I …
    hi guys, finally I solved a problem in my car since more than 3 years!! I have one VW jetta 1999 2.0L 4 cil. the VW scanner simple says that the sensor gives the rights values and is operating good but the car performance (acceleration) was poor, after make the torch test I found that the sensor was very slow for changes I simple buy a new one tested with the torch I found out that was more sensitive (fast responses) then I felt my car much faster than before , really THANK YOU VERY MUCH

  2. 96Rolla Says:

    i fallowed that …
    i fallowed that same procedure with my o2 sensor and the voltage did rise within 1 minute but wen i took it out of the flame it took for ever to drop

  3. 96Rolla Says:

    i fallowed that …
    i fallowed that same procedure with my o2 sensor and the voltage did rise within 1 minute but wen i took it out of the flame it took for ever to drop

  4. 96Rolla Says:

    i fallowed that …
    i fallowed that same procedure with my o2 sensor and the voltage did rise within 1 minute but wen i took it out of the flame it took for ever to drop

  5. alitou001 Says:

    ask the seller he …
    ask the seller he probably knows

  6. CRDLIBERTY Says:

    Hi ive got 2003 …
    Hi ive got 2003 corolla been looking at those universal four wire ebay units. $27 im guessing there not bosch lol. From autozone it shows both pre cat and after cat sensors four wires but diff part numbers. How would i know if the ones listed on ebay will work front or back?

Leave a Comment

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.